search

Johnson-systems CS-DMX Series Programmable Stations Manuel d'utilisateur Page 7

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 12
  • Table des matières
  • MARQUE LIVRES
    • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 6
www.johnsonsystems.com 7
CS-DMX-12
DC POWER SUPPLY COMMON (V-) INPUT
DC POWER SUPPLY POSITIVE (V+) INPUT
COM
V+
DMX OUT
CS-DMX-12
DC POWER SUPPLY COMMON (V-) INPUT
DC POWER SUPPLY POSITIVE (V+) INPUT
COM
V+
DMX OUT
COM
V+
ON
DIM
RST
COM
V+
ON
DIM
RST
COM
V+
ON
DIM
RST
COM
V+
ON
DIM
RST
CS-SA-ENT3B CS-SA-ENT3B
CS-DMX-12
DC POWER SUPPLY COMMON (V-) INPUT
DC POWER SUPPLY POSITIVE (V+) INPUT
COM
V+
DMX OUT
COM
V+
ON
RST
COM
V+
ON
RST
COM
V+
ON
RST
COM
V+
ON
RST
CS-SA-ENT2B CS-SA-ENT2B
CS-DMX-12
DC POWER SUPPLY COMMON (V-) INPUT
DC POWER SUPPLY POSITIVE (V+) INPUT
COM
V+
DMX OUT
COM
V+
RST
COM
V+
RST
CS-DMX-12
DMX OUT DMX IN
Wiring an Independent Control Station
An independent control station requires 2 conductors for V+ and common, and a single DMX
cable for the DMX out connection.
Wiring a Single or Multiple Entrance Control Stations
to a Master Control Station
An entrance control station (Part Numbers: CS-SA-ENT2B and CS-SA-ENT3B) is typically
installed at an entrance location and used to trigger a master control station into the “ON”, “DIM”
or “OFF” state. The entrance station(s) and master station mimic each other when a button
is pressed. Wiring between a single or multiple entrance stations and master station requires
2 conductors for V+ and common, and 3 conductors for the switches (ON, DIM and RST), 1
conductor for each switch function. A single DMX cable is required from the master control station
to the DMX receiving device.
Wiring Two or More Master Control Stations
Together with “Take Control”
When two or more master control stations are controlling the same device (DMX channels), “take
control” is typically required. When a button is pressed on one of the master control stations, it
will automatically “take control” from the other master control stations and put them in the “OFF”
state. Wiring between the master control stations requires 2 conductors for V+ and common, and
1 conductor for reset (RST) “take control”. A DMX cable between the control stations is required,
along with a DMX cable from one of the master control stations to the DMX receiving device.
Vue de la page 6
1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire
Produits connexes et manuels pour Éclairage Johnson-systems CS-DMX Series Programmable Stations
Éclairage Johnson-systems CS-IPRO Wireless Hand-Held Programmer for CS-DMX S Manuel d'utilisateur   (12 pages)
Éclairage Johnson-systems DE90-3000 Series Retrofit Control System Manuel d'utilisateur   (40 pages)
Éclairage Johnson-systems EDI-120 Control Retrofit Manuel d'utilisateur   (36 pages)
Éclairage Johnson-systems DPC-24-3000 Series Digital Pack Controller Manuel d'utilisateur   (24 pages)
Éclairage Johnson-systems CD-3000 Series Retrofit Control System Manuel d'utilisateur   (38 pages)
  • Coronis Thinklogical Jivo Technology Microha? Majestic
  • Master Lock Non Radio Shack Stations météorologiques Broan Hottes de cuisine Milwaukee Etuis pour téléphones portables ICY BOX Stations d'accueil pour disques durs et disques durs dynamiques
  • Whirlpool LTG5243DQ Keyence DL-PD1 Philips Blu-ray Disc-Player Electrolux EW9W161B Asus The new PadFone Infinity
  • Casio EX-Z250 Manuel de l'utilisateur Samsung G2736N Manuel de l'utilisateur Panasonic SC-BT730 Manuel de l'utilisateur Philips GC1015 Manuel de l'utilisateur Bixolon SRP-350III Manuel de l'utilisateur